Free tool · No sign-up
HAVS exposure calculator
Work out an operative's daily hand-arm vibration exposure in points. Pick each tool from over 380 models, or type in its vibration value, then add how long the trigger is pulled.
Tools used today
Points = 2 × vibration (m/s²)² × hours of trigger time, as in the HSE points system. Where a model isn't listed, the top of the typical range for that type of tool is used, so exposure isn't under-estimated. Always use the value for your exact tool where you have it.
How HAVS points work
Hand-arm vibration from power tools can cause hand-arm vibration syndrome (HAVS) and carpal tunnel syndrome, which are permanent. The risk depends on how much a tool vibrates and how long it is used for. The Control of Vibration at Work Regulations 2005 set two levels, based on a worker's daily exposure A(8):
- Exposure action value: 2.5 m/s² A(8), or 100 points. Above this, the employer must put in place a programme of controls to reduce exposure, and provide health surveillance.
- Exposure limit value: 5 m/s² A(8), or 400 points. Workers must not be exposed above this level.
The points system is a simple way to add up exposure from several tools in a day: each tool's points depend on the square of its vibration value, so a tool that vibrates twice as much uses up the allowance four times as fast.
Where do the vibration values come from?
Manufacturers must declare a vibration value for their tools, in the instruction manual or data sheet. The values in this calculator come from manufacturers' published data, with the source shown for each model. Real-world vibration can be higher than the declared value, especially with worn tools or the wrong accessory, so treat the result as a guide.
Questions
Should I count the whole time the tool is out?
No. Count trigger time only: the time the tool is actually running and in contact with the work. It is usually much less than people think, so it's worth timing it.
What if my tool isn't listed?
Choose the type of tool (for example "Breakers") and the calculator uses the top of the typical range for that type. Or type in the value from the tool's manual or rating plate.
Is this calculator saved anywhere?
No. Nothing you enter here is saved or sent anywhere. To keep daily records for each operative, use SiteControl 360.
Try it free for 7 days
Add your card when you sign up. Nothing is taken for 7 days, then your plan starts automatically. Cancel any time before then and you pay nothing.
SiteControl 360™